Composition: tinted plywood 4 mm
The size: 23*24/14*18
Specific References
Instractions:
1. Choose embroidery for decoration. The fabric on which the work is done must be equal to the size of the frame or be larger than it.
2. Lay piece C over the embroidery so that it fits seamlessly into the frame window. With a simple pencil, circle detail C along the outer contour.
3. Trim the edges of the embroidery along the resulting line.
4. Place part B in the center of part A. Place the embroidery on top of both parts and make sure that the edges of the work do not extend beyond the edges of part A.
5. Then place part C on the embroidery, pressing firmly, so that part B is located in the window of part C. Make sure that the holes of parts A and C are correctly positioned, they must match.
6. Fix the frame parts with clips - one on each side. Place pieces of soft cloth between the clamp and the frame to prevent damage to the frame.
7. Sew parts A and C through the holes. Colors, thread thickness and stitch type are determined by yourself, depending on your design idea. The thread can be fastened from the back side of part A in one of the holes.
16 other products in the same category:
100% cottonNumber of squares: 70 per 10 cm, 18 per 1 inchSize: 40x30 cm (outer size), 27x36 cm (printed background size)
100% cotton Number of squares: 70 per 10 cm, 18 per 1 inch Size: 21x30 cm (outer), 18.5x26.5 cm (printed background size)
100% cottonNumber of squares: 70 per 10 cm, 18 per 1 inchSize: 40x30 cm (outer size), 27x36 cm (printed background size)
Set for embroidery on felt ST-1004 "Easter traditions" The kit includes everything you need to get started: • 6 perforated blanks made of white felt. • Mouline 1 color produced by PNK named after Kirov.. • Satin ribbon - 3 pcs. • Paper two-color...
Composition: tinted plywood 4 mm
The size: 23*24/14*18
